Can You Use a Double Bass Pedal on an Electronic Kick Drum?

In News 0 comments

A double bass pedal usually works fine on an electronic kick drum or kick pad: most e-kick pads sense a single zone across the whole head, so two beaters striking that same head trigger the same way a single beater does. What changes is not the triggering electronics but the kick pad itself: its size, how it is mounted, and how well the head and beater patch hold up to two beaters instead of one.

Key takeaways

  • Most electronic kick pads use one sensing zone across the head, so a double bass pedal on electronic drums triggers the same way a single pedal does.
  • The kick pad's size and mounting matter more than its electronics: a narrow or lightly braced pad can shift or tip under two beaters.
  • A double-layered mesh head plus a beater patch protects against the extra wear two beaters bring.
  • False or double triggers are usually caused by pedal setup (spring tension, beater angle) rather than the module rejecting a second beater.
  • A single pedal is still the simpler, more stable choice for most home and practice setups.

What is a double bass pedal on electronic drums, and how does it work?

A double bass pedal is a foot pedal system with two footboards, usually linked by a connecting rod, that lets a drummer play two separate beaters against one kick drum. On an acoustic kit, each beater strikes the same head but the shell and head respond identically to both. An electronic kick drum such as the EFNOTE 16" kick works the same way from the drummer's point of view: the pad has one playing surface, and a multi-point sensor reads impact velocity across that surface rather than treating the left and right beater strike zones as separate inputs. In practice, this means the module does not need to "know" there are two beaters. It simply registers hits on the head, so a double pedal and a single pedal produce the same type of signal, just more of it.

Which kick pads actually support a double pedal?

Most full-size electronic kick pads built for acoustic-style kits are suitable for a double pedal, because they are designed to take repeated, close-together beater strikes. The EFNOTE 16" kick drum (EFD-K1612-BO) is a good example: it has a 16 x 12" birch shell, a double-layered mesh head with a beater patch, and a single head zone read by a multi-point sensor, which is the setup you want for even response across the head regardless of how many beaters hit it. The kick included with the EFNOTE Aura 70 is built the same way, at a larger 20 x 15" size that gives a double pedal's beaters more room to land without crowding the rim.

Compact kick pads (the 8" and 12" pads sometimes bundled with entry-level kits) are a different story. They are built for a single beater striking the centre of a small head, and adding a second beater on a narrow pad increases the chance of one beater clipping the rim or the two beaters interfering with each other physically. If your kit came with a small kick pad and you are planning to add a double pedal, it is worth checking the pad's diameter and mounting before you buy the pedal.

What to check before adding a double pedal to your electronic kit

Pad stability and mounting

A double pedal pushes a kick pad backward with more sustained force than a single pedal, especially during fast double-stroke patterns. Check that the pad's spurs or riser dig in and hold on your floor surface, and that any strap or bracket connecting the pad to a rack is tightened. A pad that creeps forward during play is almost always a mounting problem, not a module or triggering issue.

Beater type and head protection

Felt beaters are kinder to a mesh head than hard plastic or wood beaters, and this matters more with a double pedal because the head takes twice the strikes per bar. A beater patch, such as the EFNote kick beater patch (EFD-KBP2), is designed to extend the life of the mesh head and explicitly supports both single and double beater use. If your kick pad does not already have a patch fitted, adding one before you start double-pedal practice is a sensible first step, not an afterthought.

Triggering and false hits

If you notice double triggers or missed hits after fitting a double pedal, the most common causes are pedal-side, not module-side: spring tension set too low, a beater angle that causes it to bounce back into the head, or two beaters landing close enough together that the module's retrigger-cancel window reads them as one hit at high speed. Adjusting spring tension and beater height on the pedal itself resolves most of these cases before you need to touch any module settings.

Setting up a double pedal on an electronic kick pad

  1. Mount the pad securely, with spurs or a riser engaged against the floor or rack.
  2. Fit a beater patch if the head does not already have one, to protect against the extra wear.
  3. Attach the double pedal so the main pedal sits where your single pedal would normally go, keeping the connecting rod clear of cables.
  4. Set spring tension slightly firmer than you would for a single pedal, to reduce beater bounce-back.
  5. Play a slow double-stroke pattern first and listen for missed or doubled hits before moving to full speed.

When is a single pedal enough?

If you mostly play rock, pop or general kit grooves without fast double-kick patterns, a single pedal is simpler, lighter on the kick pad, and easier to keep stable long-term. A double pedal adds genuine value for metal, progressive and some gospel or fusion styles where sixteenth-note or blast-beat kick patterns are part of the vocabulary. If you are not sure yet whether you will use the second pedal regularly, it is reasonable to start with a single pedal and add a double pedal later: most kick pads do not need any modification to accept one.

Pedal type Typical drive Good fit for
Single pedal Chain or strap General playing, smaller kick pads, simpler setup
Double chain-drive pedal Linked chain on both beaters Players who want a traditional acoustic feel on both feet
Double strap-drive pedal Linked strap, usually lighter Faster footwork, less rotational mass

Within our own range, the EFNote EFD-KP30 is a single-chain pedal built specifically for use under an electronic kick pad, while the Tama HP30TW twin pedal is a double pedal that works equally well on an acoustic bass drum or an electronic kick pad of the sizes described above. For a wider view of what is available, our bass drum pedals collection covers both single and double options across several brands.

Common mistakes

The mistake I see most often is buying a double pedal before checking the kick pad's size and mounting, then blaming the module when the pad slides or the head wears unevenly. The second most common one is leaving spring tension too loose, which feels fast but increases beater bounce and false triggers on both acoustic and electronic kits alike.

Frequently asked questions

Can I use my acoustic double pedal on an electronic kick drum?

In most cases, yes. If your acoustic double pedal fits a standard kick hoop or rim, it will usually mount the same way on a full-size electronic kick pad such as the EFNOTE 16" kick. Check the pedal's clamp width against the pad's rim before buying anything new.

Will a double pedal damage the mesh head faster than a single pedal?

A double pedal does increase the number of strikes the head takes per minute of playing, so some extra wear is expected over time. A beater patch reduces this significantly, and a double-layered mesh head, like the one on the EFNOTE 16" kick, is built to handle sustained use better than a thin single-ply head.

Do I need a special electronic pedal, or will any double pedal work?

You do not need an electronics-specific pedal. A double pedal is a mechanical device; it does not communicate with the module at all. Any double pedal that physically fits your kick pad's mounting will work, whether it is marketed for acoustic or electronic use.

Why does my kick double-trigger when I play fast double strokes?

Double triggering during fast double-kick patterns is almost always caused by beater bounce-back hitting the head a second time, or by spring tension that is too loose. Tightening the spring slightly and checking the beater angle usually solves it faster than changing any module trigger settings.

Can I add a double pedal later if my kit came with a single pedal?

Yes, as long as your kick pad is full-size and securely mounted. Compact 8" or 12" kick pads are the main exception, since a double pedal's wider beater spacing can be awkward on a small head.

Vybe Drums is a specialist electronic drums retailer based in Den Bosch, Netherlands, shipping across the Netherlands and most of Europe, including the UK and Scandinavia. For more on the kick pad and module behind the examples here, see our guide to the EFNOTE Aura models and their specs. If you would like to feel the difference between a single and a double pedal on a full-size kick pad before you decide, you are welcome to visit the showroom in Den Bosch by appointment.

Last updated: October 2026

RELATED ARTICLES